Birds in a warehouse are a stock contamination problem before they are a cleaning problem. The decision that drives the whole job is whether to spike the steel or net the bay.
At a Glance
In a home, bird droppings are unpleasant. In a warehouse they are a contamination finding — on stock, on packaging, on the picking floor. For food, pharma and FMCG operations this turns bird control from a maintenance task into an audit requirement, which changes both the urgency and who signs off on it.
The physical difference is scale and height. Birds roost on purlins, truss chords, beam tops and light fittings, thirty feet up. There is a great deal of linear steel, and every metre of it is a potential perch.
Watch where they enter, not just where they sit
Warehouse birds usually come in through a permanently open shutter, a gable vent or a broken louvre. Treating the roost while leaving the entry open means you are treating symptoms forever.
| What you see | What it means | Treatment |
|---|---|---|
| Droppings in lines under purlins | Birds perch on the members | Spike the top surface of the members |
| Nests in the truss apex | They are settling inside the bay | Net the bay opening |
| Droppings spread across a whole aisle | They are flying through, not perching | Close the entry point first |
| Droppings on stock near a shutter | Entry point is the shutter | Strip curtain or net at the opening |
Most real warehouses need both: netting at the entry points, spikes on the members that remain attractive.
Powder-coated mild steel for structural members. Deters crows and kites, not just pigeons, and holds up to industrial dust and fumes.
For humid, coastal or wash-down environments where mild steel would corrode.
For bay openings, gable vents and truss voids — anywhere the birds fly through rather than land.
Trays are a continuous perch directly above the floor. Usually spiked along the top edge.
High bay fittings are a favourite perch. Treat them at the same time as the members or they become the new roost.
Shutter heads and louvres. Nothing above works permanently until the entry is closed.
Warehouse bird control is almost always done in a shutdown or a low-activity window, which means the schedule matters as much as the specification.
You get one shutdown
This is the single biggest reason industrial jobs go wrong. Under-ordering by 10% does not delay the job by 10% — it delays the untreated bays until the next shutdown window, which may be months away.
Direct supply from our Delhi works, at project rates, across India.
Send the structural drawings and we will return the member lengths, opening areas and a full schedule.
Heavy-gauge product where the duty needs it, and stainless where the environment demands it.
We quote the complete schedule so nothing is missing on the day of the shutdown.
DMRC, PowerGrid, Berger and GAIL are among the organisations using our products.
If your real problem is an open shutter, we will say so before quoting four hundred metres of spike.
Spike if the droppings fall in lines under members — that means perching. Net if the birds nest inside the bay or fly through it.
Purlins per bay times bay length times bay count, plus beam tops, cable trays and light fittings. Openings are measured separately in square metres.
Yes. Bird activity over stock is a standard finding in food, pharma and FMCG audits, and treatment records are usually requested.
Powder-coated mild steel for general industrial use; stainless where there is humidity, coastal air or wash-down.
Sometimes, zone by zone in low-activity periods. It takes longer and needs tighter coordination with operations.
Yes, direct at project rates, with the takeoff prepared against your drawings.
They must be able to leave before openings are closed. Never net a bay with birds or active nests still in it.
Structural drawings or photographs of each bay, plus a note on where the birds get in. We will return the member lengths, the opening areas and a full schedule — free.