We manufacture in Delhi and despatch nationwide. Where your building stands matters more than most suppliers admit — salt air, ultraviolet, monsoon and wind load each attack a different part of an installation, and they decide what fails first.
At a Glance
The same row of spikes fitted in Chennai and in Chandigarh is doing the same job against the same birds, but it is being attacked by completely different things. This is the part worth getting right before you order, because it is what decides whether the installation lasts three years or ten.
| Condition | Cities | What it attacks | What to specify |
|---|---|---|---|
| Salt-laden coastal air | Mumbai, Chennai | Metal fixings and any metal in the product. Rust streaking down the elevation follows within a season or two. | Polycarbonate rather than metal; stainless or coated fixings only |
| Extreme UV and 45°C+ summers | Delhi, Jaipur, Ahmedabad, Hyderabad, Lucknow | Unstabilised plastic. It yellows, turns brittle and snaps at the pin roots. | UV-stabilised material — this is the single biggest cause of premature failure inland |
| Heavy monsoon and humidity | Mumbai, Kolkata, Pune, Chennai | Adhesive fixings, and anything that traps water against masonry. | Mechanical fixing; fit before monsoon, not during it |
| Cyclone-season wind load | Chennai, Kolkata | Edge and parapet runs. Wind accelerates over an exposed edge and lifts anything marginal. | Mechanical fixing on all exposed edges, no exceptions |
| Dust and airborne grime | Delhi, Ghaziabad, Faridabad, Noida | Adhesion. The base sticks to the deposit, and the deposit lets go of the wall. | Proper cleaning before fitting — the step most often skipped |
| Monkey pressure alongside birds | Jaipur, Chandigarh | The installation itself. Monkeys grip and test what birds only sit on. | Monkey spikes, mechanically fixed |
Our polycarbonate is UV stabilised and carries no metal to corrode, which covers the two biggest failure modes on that list. The one that stays your decision is the fixing method — and on coastal and cyclone-exposed elevations it should be mechanical.
| Where | How it reaches you |
|---|---|
| Delhi NCR | Local supply from the works at Mitraon. Small orders and same-week despatch are straightforward. |
| Rest of India | Courier for small orders, transport for project quantities. Delivered to site or direct to your contractor. |
| Project and bulk | Quoted with freight, despatched from one batch so a whole elevation matches. |
| Dealers and resellers | Wholesale supply anywhere in India — ask for trade terms. |
We are a manufacturer rather than a network of branches, and it is worth being plain about that: we supply everywhere, and we do not claim an office in every city. What that buys you is a straight answer about the material and a price without a middle layer.
Yes, anywhere in India. We manufacture in Delhi and despatch by courier or transport depending on the quantity, to site or to your contractor.
The product usually stays the same; the fixing method sometimes changes. On coastal and cyclone-exposed elevations — Mumbai, Chennai, Kolkata — mechanical fixing is the right call rather than adhesive alone.
Because unstabilised plastic is what fails first in a Delhi or Jaipur summer — it yellows, embrittles and snaps at the pin roots, often within two seasons on a south-facing edge. Ours is UV stabilised, which is the property to check whoever you buy from.
No, and we would rather say so. We are a manufacturer in Delhi supplying nationwide. That means direct pricing and a straight answer on the material, not a branch on your street.
Yes, and for industrial and project work that is usually the simplest arrangement.
Yes, pan-India. Tell us the products and volumes you expect to move.
Those two things get you a price with freight included. If your building is coastal, exposed, or somewhere that sees 45°C summers, mention it — it changes the fixing advice, not usually the product.