Noida is the one NCR city where a factory and a housing society are equally likely to be on the same enquiry. Purpose-built industrial sectors sit alongside new high-rise, and both have bird problems — but they are different problems bought in completely different ways.
At a Glance
Noida's Phase 1, 2 and 3 sectors, and the Greater Noida belt beyond them, are full of purpose-built sheds: portal frames, long girder runs, trusses, cable trays and high-bay lighting. Every one of those is a bird surface, and they are usually all colonised together.
Close the openings before you net the roof
The instinct on a shed is to net below the trusses, and that is the expensive option. Walk the envelope first: gable vents, roof lights, louvre banks and the loading bay heads are usually how the birds get in, and closing those is a fraction of the area.
On a single 30 × 20 m bay, netting the roof is around 600 m². Closing the openings on the same building is often under 30 m². Plenty of sites need both; very few need the second without the first. Detail on warehouse jobs.
The other thing worth planning: internal work over running machinery needs a shutdown, and a shutdown window is the scarce resource. Survey well before it, not during it — see factory jobs for how the schedule of items is built.
Noida's newer societies — the high-rise sectors and Noida Extension — are a different job entirely: balcony netting, terrace parapets, water tanks and AC units.
The planned grid helps here in a way it does not in older cities. Towers within a sector, and often across a whole project, repeat the same balcony opening and the same sill detail. That means:
Cleaning is not preparation here — it is most of the job
Noida has heavy construction and road dust, and every external surface carries a grime film. An adhesive fixing applied over that film bonds to the film. The film then lets go of the wall, taking your installation with it, usually within a year.
Two answers. Clean and dry properly before fitting — the step most often skipped and the commonest reason people believe the product failed. And use mechanical fixing on exposed edges, upper floors and anything above a walkway.
| Building type | Where | Usual job |
|---|---|---|
| Industrial sheds | Phase 1, 2 and 3, Sector 63, 65, 80 | Truss netting, girder flanges, cable trays, high-bay fittings |
| Warehousing | Greater Noida, Ecotech sectors, Dadri road | Roof void netting, opening closure, audit-driven work |
| IT and office parks | Sector 62, 125, 132, Film City | Facades, atrium coves, canopies, service yards |
| High-rise societies | Sector 74–79, 100–150, Noida Extension | Balcony netting, parapets, water tanks, AC units |
| Older sectors and houses | Sector 11–50 | Sills, terraces, gate pillars, boundary copings |
Each of these covers ordering, delivery and what is specific to that product in Noida. The full specification for any of them is on the product page it links out to.
Close the openings first if the routes in can be found. On a typical bay that is under 30 m² against 600 m² of roof netting. Net the void where doors must stay open in operation, or where birds are already established up there.
Yes — non-conductive, so no interference with electrical or communication transmission, and flame retardant. That is what makes it specifiable inside a plant.
Usually dust. An adhesive fixing over Noida's grime film bonds to the film rather than the wall. Clean and dry thoroughly, and fix mechanically where exposed.
Yes, and in Noida that works well because towers within a project repeat the same balcony opening. Send one measurement and the flat count.
Survey and quote well before it, so material is on site and permits issued when the line stops. The shutdown window is the scarce resource, not the labour.
Yes, including the Ecotech sectors and the Dadri road warehousing belt.
For a plant, send hall dimensions, girder and tray run lengths and your shutdown dates. For a society, send one balcony opening size and the flat count. Either way it is a quote the same week — and being Delhi-based, delivery to Noida is short.