Faridabad is a manufacturing city sitting against the Aravallis, and both halves of that show up in the brief. Inside the plants there are hot process areas where the temperature rating of the material matters. Outside them, the animal on your boundary wall is often not a bird.
At a Glance
The one specification question specific to Faridabad
Auto component plants, forging shops and foundries have surfaces that run hot — duct runs, pipe racks, structures near furnaces and heat-treatment lines. Anywhere birds perch above those, the deterrent has to survive the temperature.
Our material is rated to 150°C. That comfortably covers ordinary plant steelwork, cable trays and lighting, and a great deal of ducting. It does not cover everything in a forging or foundry environment.
So the practical instruction is simple: take a surface temperature reading on any run near a heat source before it goes into the schedule, and tell us the figure. It is a five-minute check that prevents a material choice that quietly fails.
Faridabad's industrial estates are older and denser than Noida's, and the work has to fit around production rather than the other way round.
The quantity almost always comes out higher than a first estimate, because of the doubling factors: both girder flanges, both cable tray rails, two rows on a wide parapet. On a typical hall those account for more than half the total.
Faridabad borders Aravalli land, and macaques are established in the older sectors, along the Surajkund side and around several of the industrial estates. A bird enquiry here frequently turns into a monkey enquiry.
| Birds | Monkeys | |
|---|---|---|
| What the product does | Removes the footing from a surface | Blocks a route they walk |
| Realistic outcome | They stop using that surface | They stop using that route — not the property |
| Scale | Low profile | 2 inch spikes, 4 inch coverage |
| Fixing | Adhesive or mechanical | Mechanical only — they grip and pull |
| Legal position | Protected; do not disturb active nests | Protected; deterrence legal, harm and relocation are not |
| Root cause | Shelter and ledges | Food — bins, canteen waste, offerings |
The food point is the one that decides whether it works. On an industrial estate that usually means canteen waste and open bins. Close the routes and leave the food and they will find another way in. Full detail on monkey spikes.
| Building type | Where | Usual job |
|---|---|---|
| Manufacturing plants | Sectors 6, 24, 25, 27, 31, 58, 59 | Girders, trusses, cable trays, high-bay lighting |
| Warehousing | Ballabgarh, Mathura Road corridor, Prithla | Roof void netting, opening closure |
| Older sectors and houses | Sectors 7 to 21, NIT, Old Faridabad | Boundary copings, gate pillars, terraces — often monkey routes as well |
| Newer societies | Greater Faridabad, Neharpar, Sector 75–89 | Balcony netting, parapets, water tanks |
| Institutions | Sector 16, Surajkund road | Facades, canopies, porches |
Each of these covers ordering, delivery and what is specific to that product in Faridabad. The full specification for any of them is on the product page it links out to.
Up to 150°C, yes. Take a surface temperature reading on any run near a heat source before specifying and tell us the figure — forging and foundry environments can exceed it.
Yes. It is non-conductive, so no interference with electrical or communication transmission, and it is flame retardant.
Roof, parapet and perimeter work usually can. Anything over running machinery cannot, which is why internal items get scheduled into a planned shutdown.
Then you need the monkey product — taller, wider, mechanically fixed. Bird spikes are the wrong scale and a macaque simply steps over them.
No, and nobody should claim it. They block the specific route you treat. What keeps monkeys on an industrial estate is food — canteen waste and open bins — and that has to be dealt with alongside.
Not by you or by a private contractor. They are protected wildlife and that is a Forest Department matter.
Yes — line-item quantities, material specification including temperature rating, scope boundaries and programme.
For a plant, send hall dimensions, girder and tray run lengths, fitting counts and your shutdown dates — plus a temperature reading on anything near a heat source. For monkeys, tell us where they actually walk and how long that stretch is.